- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
SW-520D is the main application of tilt sensor. SW-520D is a ball-type tilt induction unidirectional trigger switch. When the tilt switch probe placed in the horizontal state is subjected to external force and deviates from the horizontal state position more than 15 degrees to the right, the metal ball contact inside the tilt switch acts and the contacts are often disconnected. At this time, the output low level signal is low. When the external force is withdrawn, the tilt switch returns to the horizontal state and the metal ball contact is closed again. A high level signal is output at this time.
It can be used for tilting and dumping of various products and devices (only the angle can be perceived to change), such as tilting alarm, when the module is tilted, output low level control buzzer alarm. For example, when the module is tilted, the output low level controls the relay suction to control the high power load.
| Parameter type | Characteristics |
|---|---|
| Specification | 22×30mm |
| Positioning aperture | 3mm |
| Control signal | Digital signal |
| Working voltage | 3.3-5V |
| Interface | 3P |
| Line sequence | G V D |
| Signal output type | When the horizontal state of the product is tilted to the right and the tilt angle is greater than 15 degrees, the low level signal is output, otherwise the high level state is maintained. |
SW-520D is the main application of tilt sensor. SW-520D is a ball-type tilt induction unidirectional trigger switch. When the tilt switch probe placed in the horizontal state is subjected to external force and deviates from the horizontal state position more than 15 degrees to the right, the metal ball contact inside the tilt switch acts and the contacts are often disconnected. At this time, the output low level signal is low. When the external force is withdrawn, the tilt switch returns to the horizontal state and the metal ball contact is closed again. A high level signal is output at this time.
It can be used for tilting and dumping of various products and devices (only the angle can be perceived to change), such as tilting alarm, when the module is tilted, output low level control buzzer alarm. For example, when the module is tilted, the output low level controls the relay suction to control the high power load.
| Parameter type | Characteristics |
|---|---|
| Specification | 22×30mm |
| Positioning aperture | 3mm |
| Control signal | Digital signal |
| Working voltage | 3.3-5V |
| Interface | 3P |
| Line sequence | G V D |
| Signal output type | When the horizontal state of the product is tilted to the right and the tilt angle is greater than 15 degrees, the low level signal is output, otherwise the high level state is maintained. |
